Skip to main content

Changes to H1 Energy Efficiency and how Blown Insulation helps meet the new rules.

Changes to H1 Energy Efficiency Rules in New Zealand

In this article, we discuss the recent changes to H1/AS1 in the New Zealand Building Code and what that means for the insulation levels required in your home moving forward.

You’ve probably seen from the media that the building industry has been under incredible pressure over the past 2 years. With interest rates at all-time lows, the demand for building and construction services has boomed to levels never seen in New Zealand. This has meant that manufacturers have been producing building materials in record quantities however this still hasn’t been enough to keep up with the demand. To add to the chaos, COVID-19 has impacted supply chains, creating issues with accessing the raw materials necessary to manufacture building products. This perfect storm has pushed the price of building up more than 30% during the same period.

During this time the Government has also been focused on improving the building standards for the industry. In particular, the government has focused on improving energy efficiency and improving this by increasing the minimum insulation/R-values as a control of airflow, solar heat gain, hot water systems and artificial lighting. In doing so, MBIE (Ministry of Business, Innovation & Employment) has announced changes to H1/AS1 which will apply to all new homes from 2nd November 2022.

What are the changes to H1/AS1 and what does this mean for new homes?

The major update has been the creation of 6 climate zones throughout New Zealand. These Zones will determine the new minimum insulation standards required from your home.

The table below shows the increase in minimum R-Vales across the new climate zones.

Ceiling insulation will increase to a minimum of R6.6 across all zones and underfloor insulation will increase to R3.0. Wall insulation slightly increases to R2.0 however further changes to wall insulation levels are expected in the future.

Across all zones, the minimum insulation levels have been increased across ceiling, wall, and floor insulation as well as windows and glazing. Due to the increase in thermal performance, a home built to the new standards will be approximately 40% more energy-efficient, reducing the overall energy needed to heat and cool your home.

Insulation and Joinery manufacturers are rapidly working to design and re-engineer their product ranges to ensure builders and construction companies can meet comply with the new standards by the November 2022 deadline.

Future proposed insulation changes to H1/AS1 Acceptable Solutions.

It was widely expected that MBIE would announce new requirements that wall thicknesses in standard residential homes would increase from 90mm to 140mm as part of these changes. After consultancy with industry leaders, it was determined that this would put too much pressure on the industry however it is still expected that this change will come into effect at some point in the next few years.

Homes with a 140mm wide wall cavity would require a much higher level of wall insulation, and many home builders are actively looking at adjusting their designs in anticipation of these future changes.

How do these changes affect me?

If you have an existing house, you don’t need to do anything however if you’re building a new home, you’ll need to comply with the new requirements.

As a landlord, you may also want to consider upgrading your homes insulation to ensure they need the new standards.

If you have questions about the changes to H1/AS1 or would like a free home assessment we’d be happy to chat. Feel free to contact one of our sales consultants so we can discuss your specific requirements.